NuWave Brio 4.5Q - Stage Cooking Function; Programming Multi-Stage Cooking

instructions
18
INSTRUCTIONS
18
Stage Function
You can program a maximum of 5 stages into your Brio.
1. Press ON/OFF. This is stage 1 cooking.
• Adjust cooking temperature by pressing - or + to reach your
desired temperature.
• Adjust cooking time by pressing COOK TIME and - or + to
reach your desired cooking time.
2. Press STAGE.
• To adjust the cooking temperature
for stage 2, press - or + to reach
your desired temperature.
• Adjust cooking time by pressing
COOK TIME. The display will
show time, stage 2, and 00:00.
Press - or + to reach your
desired cooking time.
3. Press STAGE again to program a third stage of cooking. The display
will show default cooking temperature (360F), temp, and stage 3.
• To adjust the cooking temperature for stage 3, press - or + to
reach your desired temperature.
4. Adjust cooking time by pressing COOK TIME. The display will
show time, stage 3, and 00:00. Press - or + to reach your desired
cooking time.
• A maximum of 5 stages can be programmed.
5. Press START/PAUSE to begin cooking. The Brio will cook your
food, following the stages programmed.
Example Cook Stage 1 at 300°F for 17 minutes » Cook Stage 2 at
360°F for 30 minutes » Cook Stage 3 at 400°F for 5 minutes:
1. Press ON/OFF. Press - or + to adjust cooking temperature to 300F.
2. Press COOK TIME. Press - or + to adjust cooking time to 00:17.
3. Press STAGE. Press - or + to adjust cooking temperature to 360F.
4. Press COOK TIME. Press - or + to adjust cooking time to 00:30.
5. Press STAGE. Again, press - or + to adjust cooking temperature
to 400F.
6. Press COOK TIME. Again, press - or + to adjust cooking time to
00:05. Press START/PAUSE.
360F
STAGE
2