1
2
3
4
5
MADE IN CHINA
1. POWER IN
The requires 9V DC/300 mA with center negative. Use the power
supply with identical specifications.
2. OUTPUT
Connect the OUTPUT of the pedal to your guitar amplifier or the
Input of the other effects unit.
3. LED Indicator
Lights up when the pedal is enabled.
4. ON/OFF Switch
This foot switch is used to turn effect on/off.
5. INPUT
Connect the INPUT of the pedal to your guitar or some other
effects unit with a 1/4-inch mono phone plug.
Thank you for choosing our products. Please take time to read this
manual carefully to get the most out of the unit. We recommend
you to keep the manual for future reference.
Do not use the pedal in high temperature, high humidity,
or subzero environments. Do not use the pedal under the
direct sunlight. Do not disassemble the pedal by yourself.
SPECIFICATIONS
●Input impedance: 1M Ohms
●Output impedance: 10K Ohms
●Power: External AC adaptor delivering
9V DC regulated minimum 300mA ( )
PRODUCT INTERFACE
To Next Page
Loading...
Need help?
General
