NXP Semiconductors KW45B41Z-EVK - Ranger 4 UWB Socket

NXP Semiconductors
KW45B41Z-EVKUM
KW45B41Z-EVK Board User Manual
LPSPI1_PCS3 — D10 — 3
LPSPI1_SIN — D12 — 5
GND — 7
I2C1_SDA — D14 — 9
LPSPI1_SOUT — D11 — 4
LPSPI1_SK — D13 — 6
VREF_OUT — VREFH — 8
I2C1_SCL — D15 — 10
J2
8 — P12V
6 — GND
4 — IOREF — VBOARD
2 — VBOARD
7 — GND
5 — P5V
3 — RST — RST_TGTMCU_B
1 — X
J3
J1
J4
6 — A5 — UART1_RX
4 — A3 — BOOT_CONFIG
2 — A1 — ADC0_A6
5 — A4 — UART1_TX
3 — A2 — ADC0_B6
1 — A0 — ADC0_B5
CAN0_TX — D2 — 3
TPM0_CH2 — D4 — 5
RF_GPO_2/TPM0_CH1 — D6 — 7
LPSPI1_PCS2 — D8 — 1
CAN0_RX — D3 — 4
TPM1_CH0 — D5 — 6
TPM0_CH0 — D7 — 8
INT_B_PMIC — D9 — 2
UART0_RX — D0 — 1
UART0_TX — D1 — 2
Figure 25. Arduino socket connector pinouts
2.11 Ranger 4 UWB socket
The KW45B41Z-EVK board has a Ranger 4 ultra-wideband (UWB) socket with the following two connectors:
• J5: 2x10 position receptacle
• J6: 2x8 position receptacle
The Ranger 4 socket is pin-compatible with a Ranger 4 UWB board.
Figure 26 shows the pinouts of the Ranger 4 UWB socket connectors.
KW45B41Z-EVKUM All information provided in this document is subject to legal disclaimers. © 2023 NXP B.V. All rights reserved.
User manual Rev. 2 — 13 February 2023
39 / 50