Need help?Do you have a question about the NZSAT WIND UP and is the answer not in the manual?
Procedure for setting the dish's elevation and azimuth based on location.
How to find satellite signal and optimize dish position for best quality.
Locking the dish in place after successful alignment.
Step-by-step guide to safely park the satellite dish for travel.
Crucial safety notice regarding driving with an elevated dish and operational disclaimer.
Diagnosing problems with no satellite signal, quality, or picture.
Resolving issues with dish rotation or winding mechanism.
Troubleshooting the elevation meter display and sensor connections.
Steps for selecting a mounting position, drilling, and attaching the main unit.
Guides for mounting the LNB arm cradle, routing cables, and securing entry points.
Installing internal components, adjusting handles, and important post-installation notes.
Procedure for cutting the hexagonal shaft for the winding handle.
Technical details including operating voltage, LNB frequency, gain, and weight.
Key physical measurements of the dish assembly when raised and parked.
To Next Page
General