Oase BioCompact 25 - Impeller Unit Maintenance and Wear Parts; Spare Parts and Disposal

‐EN‐
14 BioCompact 25/50
BioCompact50
Howtoproceed:
E
1. Removethelidofthefiltercontainer.
2. Pulloutthefoamholder.
3. Removethefoamfilterandrinseinwarm
wa‐terorreplace.
4. Pulloutthefilterbox.
ReplacingtheimpellerunitBioCompact 25/50
Howtoproceed:
F
1. Pulloffthemotorhousing.
2. Removetheimpellerunit,cleanorreplace.

3. Reassembletheunitinthereverseorder.
WEARPARTS
The following components are wear parts and
areexcludedfromthewarranty:
 Impellerunit
 Filtermedia

 Suctioncups
DISPOSAL
Donotdisposeofthisunitwithdomesticwaste!
Fordisposalpurposes,pleaseusethereturnsys‐
temprovided.Rendertheunitunusablebefore‐ 
handbycuttingthecables.
SPARE PARTS
The use of original parts from OASE ensures
continued safe and reliable operation of the unit.
Please visit our website for spare parts drawings
and spare parts.
5. Remove the foam filter and rinse in warm
water or replace.
6. Replace the activated carbon.
7. Reassemble the unit in the reverse order.
http://www.oase-livingwater.com/spareparts-international-ia