Oberheim Matrix-1000 - Page 36

• When the dump is completed, select Patch mode on the Matrix-
1000. The received patches are now available.
Note that Matrix-6
and 6R units with software version 2.13 or earlier may
transmit patch es faster than the Matrix-1000 can receive them during a
SEND ALL. The result may be that some patches are not successfully
transferred.
These patches can be sent using the Matrix-6 SEND ONE
function. Aiso note that the Matrix-6 will send Split and Master informa-
tion
du ring a SEND ALL. This extra information will be ignored.
Matrix-1000 Owner's Manual 35