Océ Copiers - Programming Date & Time
1
cm2520 / cm2522/ cm3522/ cm4520 / cm4521 / cm5520 / cm6520 / im6020 / im7520 / im9220*
1. Press Utility/Counter button.
2. Touch Administrator Setting tab.
3. Enter password [Default - 12345678] and touch OK. For im9220 default password is
00000000.
4. Touch System Setting tab.
5. Touch Date/Time Setting tab.
6. Enter current date and/or time and touch OK.
7. Press Reset button.
cm3520
1. Press Utility button.
2. Touch Admin Mode tab.
3. Enter administrator code [Default – 00000000] and touch Enter tab.
4. Touch Admin Set tab.
5. Touch 3 / 4 tab.
6. Touch Date & Time Setting tab.
7. Enter current date and/or time and touch Enter tab.
8. Touch Exit tab 3 times.
cm2020 / cm3120
1. Press Utility button.
2. Touch User’s Choice 1 tab.
3. Touch Date/Time Set tab.
4. Enter current date and/or time by touching desired tab. To clear setting press C button
and then enter correct setting.
5. Touch Enter tab.
6. Touch Exit tab twice.
cm3530 / cm4530 / im2330 / im2830 / im3530 / im4530 / im5530 / im6030 / im7230 / im8530
1. Press User Functions button.
2. Touch Admin tab.
3. Touch Password tab then enter password [Default – 123456] and touch Enter tab.
4. Touch General tab.
5. Touch Clock tab.
6. Touch Date/Time tab.
7. Touch Return tab 3 times.
* Added cm2522/cm3522 (6/9/08).
To Next Page
General
