Oce im7520 User Manual (English)

Other manuals for Oce im7520

Questions and Answers:

G
garzathomasSep 9, 2025
Why can't I specify the hole punch function on my Oce All in One Printer?
- R
  Rebecca LeeSep 9, 2025
  The hole punch function on your Oce All in One Printer might be unavailable because hole punching cannot be specified if [Booklet] or [Transparency] is selected; check each setting in the printer driver. Also, if optional finisher (excepting Shift Tray) is installed, in addition, the Punch kit or Punch Z-Fold Unit should have been installed; install the required optional finisher and enable it using the printer driver.
G
gonzalezjenniferAug 23, 2025
What to do if Oce All in One Printer displays an error message?
- C
  Carrie BlairAug 23, 2025
  If your Oce All in One Printer displays an error message, the cause could be a destination error, a connection declined by the other party machine, a disconnection of the line, no response received from the network, a mail delivery error, a connection reset by the other party machine, a busy local machine network, or a communication time out. Check the condition of the other party machine. Also, check the network setting of your local machine and ask your network administrator if the network is operating normally. Verify there are no abnormal network conditions, such as a disconnected cable. After checking the settings and the network cable, try turning the main power switch off and on, then send the message again after a while.
A
Adam KaneAug 25, 2025
Why is my Oce All in One Printer not printing even though the job is completed on the computer?
- J
  Jessica DavisAug 25, 2025
  If your Oce All in One Printer doesn't start printing after the print job completes on your computer, several factors could be responsible. First, verify that the selected printer driver is compatible with the print controller and that the correct printer name is selected. Check the printer's control panel for any error messages. A print job might be queued, delaying printing; check the Active Jobs list on the control panel. If '[Save in User Box]' or '[Secure Print]' was selected, see if the job is stored on the Box screen or Secure Print User Box screen. If account track settings are applied, ensure the correct account name (or password) is entered. Insufficient computer memory could also be the cause, so perform a test print.
J
Jeanette MilesAug 27, 2025
How to fix printing not performed as specified on Oce All in One Printer?
- J
  Jeffery CraigAug 27, 2025
  If printing is not performed as specified on your Oce All in One Printer, the most likely cause is incorrect settings. To resolve this, carefully check each setting in the printer driver to ensure they are correctly configured.
C
Christopher WeeksAug 27, 2025
Why can't I staple with my Oce im7520?
- S
  Stephanie HaydenAug 27, 2025
  If stapling cannot be performed on your Oce All in One Printer, it could be due to several reasons. Ensure that the number of sheets does not exceed the stapling capacity: 100 sheets for Staple Finisher (100 sheets) and 50 sheets for Staple Finisher (50 sheets) / Folding Finisher on A4 or smaller plain paper; if it exceeds - change the Copies setting. For center-stapling with a Folding Finisher, the limit is 20 pages of plain paper. Also, stapling is not possible if the document contains pages of different sizes; in this case, check the document.
J
James StevensonAug 29, 2025
Why is paper not feeding from the specified source on my Oce im7520 All in One Printer?
- K
  kimberly76Aug 29, 2025
  If paper is not being fed from the specified paper source on your Oce All in One Printer, it may be because the paper source is loaded with paper of a different size or orientation than what is specified. To fix this, load the paper source with paper of the appropriate size and orientation.
J
Jonathan AlvarezSep 14, 2025
Why can't I select a printer driver setting on my Oce All in One Printer?
- P
  phillipsmatthewSep 14, 2025
  If a printer driver setting cannot be selected on your Oce All in One Printer, it is probably because some functions cannot be combined. Avoid trying to select settings that are not available.
C
christopherlevineSep 12, 2025
Why are the pages not being punched on my Oce All in One Printer?
- R
  Roberto BooneSep 12, 2025
  If the pages are not being punched on your Oce All in One Printer, it could be because the paper is loaded into the paper source with an incorrect orientation. Check the orientation setting to resolve this issue.
S
Stephanie ArroyoSep 7, 2025
How to adjust stapling position on Oce im7520 All in One Printer?
- P
  petermillerSep 7, 2025
  If the stapling position is not as expected on your Oce All in One Printer, the orientation setting might be incorrect. Check the stapling position in the printer driver setup dialog box to correct this.
J
john06Sep 4, 2025
What does the 'Conflicts' message mean on my Oce All in One Printer?
- M
  Michael AtkinsonSep 4, 2025
  If you see a 'Conflicts' message with 'Unable to Select' or 'Function' on your Oce All in One Printer, it means an incorrect combination of functions has been specified. To resolve this, check the settings and specify the functions correctly.