1
1.5 Operation Precautions
To ensure the optimum performance of this machine, observe the precau-
tions described below.
Power Source
The power source requirements are as follows.
- Voltage : 120 V AC
- Frequency : 60 Hz
– Use a power source with as little voltage or frequency fluctuations as
possible.
Operating Environment
The environmental requirements for correct operation of the machine are as
follows.
- Operating temperature: 10°C (50°F) to 30°C (86°F)
- Humidity: 10% to 80%
Storage of Copies
To store copies, follow the recommendation listed below.
- Copies that are to be kept for a long time should be kept where they are
not exposed to light in order to prevent them from fading.
- Adhesive that contains solvent (e.g., spray glue) may dissolve the toner
on copies.
To Next Page
Loading...
