Oce im3512 - Page 2

Océ Copiers - Programming Date & Time
2
cm2510 / cm4010 / im3512 / im4512
1. Press System Settings button.
2. Touch Default Settings tab.
3. Touch Clock tab.
4. Enter current date and/or time and touch OK.
5. Press CA button.
im3511 / im4511
6. Press Custom Settings button.
7. Touch Default Settings tab.
8. Touch Clock tab.
9. Enter current date and/or time and touch OK.
10. Press CA button.
im3510 / im4510 / ZB35 / ZB45
1. Press Custom Settings button.
2. Touch Clock tab.
3. Enter current date and/or time and touch OK.
4. Press CA button.
im6530 / im8130 / ZD65 / ZD81
1. Touch Program tab.
2. Touch Next tab.
3. Touch Date/Time tab.
4. Press FC button.
im2020 / im2520 / im2520f / im3520 / ZC20 / ZC25 / ZC35 / ZF25
1. Press Utility button.
2. Touch Admin Management tab.
3. Enter Administrator Code [Default – 00000000] and touch Enter.
4. Touch Admin 1 tab.
5. Touch Initial Settings tab.
6. Touch Date/Time Set tab.
7. Touch TimeDate tab.
8. Enter current date and/or time and touch Enter.
9. Touch D.S.T. tab and touch OFF then touch Enter.
10. Press Panel Reset button.