270-00000-000-02-0108 iii
About This Manual
Document Purpose and Intended Audience
This document provides the users of USB2000+ Spectrometers with instructions for setting up,
calibrating and performing experiments with their spectrometer.
Document Summary
Chapter Description
Chapter 1: Introduction
Contains descriptive information about the USB2000+
Spectrometer and how sampling works. It also provides a list
of system requirements, interface options, and shipment
components.
Chapter 2: Installing the
USB2000+
Provides installation instructions.
Chapter 3: Troubleshooting
Contains recommended steps to isolate and correct common
problems.
Appendix A: Calibrating the
Wavelength of the USB2000+
Provides instructions for calibrating the USB2000+
Spectrometer.
Appendix B: External Triggering
Contains information about external triggering for the
USB2000+.
Appendix C: Specifications
Contains technical specifications and connector pinouts for the
USB2000+ Spectrometer.
Product-Related Documentation
You can access documentation for Ocean Optics products by visiting our website at
http://www.oceanoptics.com
. Select Technical → Operating Instructions, then choose the appropriate
document from the available drop-down lists. Or, use the Search by Model Number field at the bottom
of the web page.
• Detailed instructions for SpectraSuite Spectrometer Operating Software are located at:
http://www.oceanoptics.com/technical/SpectraSuite.pdf
.
• Detailed instructions for the Breakout Box are located at:
http://www.oceanoptics.com/technical/HR4_breakout.pdf
.
• Detailed instructions for external triggering are located at:
http://www.oceanoptics.com/technical/external-triggering.pdf
.
To Next Page
Loading...
