Oceanic Pro Plus 2 - To Set - Max Depth Alarm

26
ATR
FEET
MAX
O
2
N
2
TO SET - MAX DEPTH ALARM
(while in the Surface Mode)
Factory set for 330 feet, the Alarm can be set to values
between 30 feet (3 meters) and 330 feet ( 99 meters) in
increments of 10 feet (3 meters).
 Press Both buttons simultaneously, release when SET: 1
appears (2 seconds).
 Press and release the Left (Advance) button, FO2 appears
with the value flashing.
 Press the Left (Advance) button 1 more time.
 The graphics FEET MAX and dEEP , and Alarm icon
appear with the Max Depth set point value flashing (Fig.
21).
 Press and release the Right (Select) button until the desired
Depth Alarm value appears; or press and hold to scroll
through the set points.
 Press the Left (Advance) button to accept the setting and
advance to Elapsed Dive Time Alarm, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.
Fig. 21 - Set Max Depth Alarm