Oceanic Pro Plus 2 - To Set - Elapsed Dive Time Alarm

27
ATR
O
2
N
2
TO SET - ELAPSED DIVE TIME ALARM
(while in the Surface Mode)
Factory set for 3:00 (hr:min), the Alarm can be set to values
between 0:10 and 3:00 (hr:min) in increments of 5 minutes.
 Press Both buttons simultaneously, release when SET: 1
appears (2 seconds).
 Press and release the Left (Advance) button, FO2 appears
with the set point value flashing.
 Press the Left (Advance) button 2 more times.
 The graphic EdT , and Alarm and Dive Time icons appear
with the Elapsed Dive Time value flashing (Fig. 22).
 Press and release the Right (Select) button until the desired
Alarm value appears; or press and hold to scroll through
the set points.
 Press the Left (Advance) button to accept the setting and
advance to PC Interface, or press and hold Both buttons
for 2 seconds to revert to Surface Mode.
Fig. 22 - Set Elapsed Dive
Time Alarm