EasyManua.ls Logo

Oceanic VT Pro - Demo Dive Mode Operation

Oceanic VT Pro
102 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
79
FEET
DEMO
ATR
5
10
20
0
PSI
O
2
Demo Dive Mode
• Press and hold the Side (Select) button for 2 seconds to
access Demo Dive Mode. The DOWN Arrow will
appear flashing (Fig. 100).
Descending
Hint: Quick taps (<2 seconds) of the Side (Select) button starts/
stops Descents and Time Acceleration. Quick taps of the Front
(Advance) button accesses Alternate displays.
• While the Down Arrow is flashing, tap (press/release) the Side (Select) button to begin
a Descent at a rate of 5 feet (1.5 meters) per real second.
• Tap (press/release) the Side (Select) button during the Descent to stop the Descent.
• Tap (press/release) the Front (Advance) button during the Descent, or stopped, to
access the Alternate Displays.
• Press and hold the Side (Select) button for 4 seconds to access Time Acceleration.
The small clock icon begins flashing (Fig. 101).
• Tap (press/release) the Side (Select) button to increase
Elapsed Dive Time 1 minute per real time second.
• Tap (press/release) the Side (Select) button during Time
Acceleration to restore normal time rate of 1 second per real
second.
• To start an Ascent, tap (press/release) the Side (Select) button
to stop a Descent.
Fig. 101 - Time Acceleration
Fig. 100 - Dive Mode Setup
DEMO
ATR
5
10
20
30
40
50
60
0
PSI
O
2

Related product manuals