BA_OTE 3+4_Endkunde_EN_V03_20170726.docx Page 49 of 52
Call up procedure:
1) Press the adjustment knob in the main
display > the main menu appears
2) Select the heat pump by turning the ad-
justment knob and confirm by pressing
the knob. > the temperature image for the
auxiliary heater appears.
3) In heat pump temperature image, select
the heat pump menu by pressing the ad-
justment knob.
4) By turning the adjustment knob, select
Operation selection in the heat pump
menu and confirm this by pressing the
knob.
5) The amount of heat can be called up:
a) Heating energy
b) De-icing energy
c) Cooling energy
d) Hot water energy
To Next Page
Loading...
Need help?
General