What to Do Before Starting the Engine (Key OFF)
Check operation of indicator lamps in multifunction
gauge (during first few seconds of key ON).
Check for messages on multifunction gauge.
Check operation and cleanliness of headlights and
taillight.
Check operation of high and low beam.
Check operation of brake light.
Check if steering operates freely by completely
turning i from side to side.
Check operation of shift lever(P, R,N, H and L).
Check operation of 2WD/4WD selector.
Drive forward slowly a few feet and apply brakes
individually to test them. The brakes must fully
apply. Lever and pedal must fully return when
released.
Emergency
engine stop
switch
Check that the emergency engine stop switch is
working
properly.
Check if ignition switch is working properly by
restarting and stopping the engine.
To Next Page
Loading...
Need help?
General
