TYPICAL
1.Spark arrester
2.Sasket
3.Exhaust tail pipe
Remove carbon deposits from the
spark arrester using a brush.
NOTICE: Use a soft brush and be
careful to avoid damaging spark
arrester mesh.
CAUTION: Wear eye protection and
gloves.
Inspect mesh of spark arrester for
any .damage. Replace as required.
NOTE: Spark arrester screen
replacement is required only when
damaged
Inspect spark arrester chamber in
muffler. Clean any debris as required
Install new gasket, tail pipe and new
retaining screws.
Reinstall muffler cover with new
retaining screws. Tighten to
specification.
To Next Page
Loading...
Need help?
General
