ODYS Multi Pocket TV 430
EN
8.1 DVB-T Installation – channel search
1. Switch on your Multi Pocket TV 430.
2. Press the Menu Key.
3. Select the Menu „Digital TV“ (DVB-T) using the key.
4. Press the „Enter“ Key to enter Digital TV.
5. select the Menu option „Installation“ using the keys and the Enter Key.
6. choose your desired search method for the channel search using the
keys and Enter Key.
7. it is strongly recommended to choose the Option „Country scan “.
8. Press the „Enter“ Key to enter „ Country scan “.
9. Using the Keys between the country selections.
10. Using the Keys move between the Area selections.
11. highlight your desired Area setting using the Keys.
12. Press two times the „Enter“ key to start the channel search.
13. Using the „Return“ key to get back in the main menu.
Note
Whether and how many DVB-T channels can be received by Multi Pocket TV 430,
is strongly depending on the operational place, and the DVB-T signal strength in
this Area.
DVB-T radio in particular is very limited and not available in most locations.
8.2 TV- Channel Selection
1
Press the MENU or Return Key to exit your current mode, or switch on the Multi
Pocket TV 430. the DVB-T Mode is the Standard mode of the Device and will start
automatically.
2
You can switch to the stored TV programmes going both forwards and backwards in
succession using the or CH+ and CH- buttons.
3
Set a suitable volume using the Vol+ und Vol- buttons.
4
Press the ENTER Key to call the short-key menu.
To Next Page
Loading...