Odys Multi Pocket TV 430 - TV Display; OSD Settings

ODYS Multi Pocket TV 430
EN
11.1 TV Display
Display Mode Colour Mode for AV out: Select NTSC or PAL. It is recommended
to use PAL in Europe.
Aspect Ratio Change the display prompt in DVB-T mode.
Note
Normally the setting 16:9 is recommended. Specially while
watching TV the setting 4:3 Pan&Scan could be better.
This setting is only available in DVB-T mode.
Video Output Signal format for AV out: CVBS
Brightness Set the display brightness (0-100%).
Contrast Set the display contrast (0-100%).
HUE Set the display HUE (-6 - 6).
Saturation Set the display saturation (0 - 12).
11.2 OSD Settings
OSD Theme Choose one of 6 different colour themes for the menu.
Time on OSD The current time will be prompted at the display if on.
OSD Timeout Choose how long the program info after a channel skip or after
choosing “Program Info” from the Quick list will be visible on
screen.
OSD Trans Set the menus transparency.
OSD Language Change the OSD language
1. Audio
Language
If available this language will be used at first for DVB-T
Stations.
2. Audio
Language
If available this language will be used secondary for DVB-T
Stations.
Note
Different languages are used by a few DVB-T stations. If the selected language is not
available the system uses the default station language.