Odys Multi Pocket TV 430 - 3 Quick Start Guide; Language Setting; DVB-T Installation - Channel Search

ODYS Multi Pocket TV 430
5
EN
3 Quick Start Guide
3.1 Language Setting
1. Switch on your Multi Pocket TV 430.
2. Press the Menu Key.
3. Select the Menu „Configuration“ using the key.
4. Press the „Enter“ Key to enter Configuration.
5. Select the „OSD Setting“ option using the key and Enter key.
6. Move to „OSD Language“ using the key.
7. highlight your desired language using key in the language list.
8. confirm the language selection using the „Enter“ key.
9. Using the „Return“ key to get back in the main menu.
3.2 DVB-T installation – channel search
1. Switch on your Multi Pocket TV 430.
2. Press the Menu Key.
3. Select the Menu „Digital TV“ (DVB-T) using the key.
4. Press the „Enter“ Key to enter Digital TV.
5. select the Menu option „Installation“ using the keys and the Enter Key.
6. choose your desired search method for the channel search using the
keys and Enter Key.
7. it is strongly recommended to choose the Option „Country scan “.
8. Press the „Enter“ Key to enter „Country scan “.
9. Using the Keys move between the Country selections.
10. highlight your desired Area setting using the Keys.
11. Press two times the „Enter“ key to start the channel search.
12. Using the „Return“ key to return to the main menu.
Note
Whether and how many DVB-T channels can be received by Multi Pocket TV 430,
is strongly depending on the operational place, and the DVB-T signal strength in
this Area.
DVB-T radio in particular is very limited and not available in most locations
Please note that for using of DVB-T after each larger local changes, a new
channel search should be accomplished. Since the frequency of the Channels
may Vary from region to region.