How to fix OHAUS ANALYTICAL Plus Scales that will not turn on?
If your OHAUS Scales are not turning on, the power cord may not be plugged in or properly connected to the balance. Check the power cord connections to ensure they are secure.
What to do if OHAUS Scales display locks up?
If the OHAUS Scales display is showing random segments or the display locks up, it might be due to the microprocessor locking up. Try turning the power off, and then turn it back on. If the issue continues, the unit needs servicing.
Why OHAUS Scales showing incorrect weight?
If you are getting an incorrect weight reading on your OHAUS Scales, it could be that the balance was not re-zeroed before weighing or it is not properly calibrated. Press the ON button with no weight on the pan to re-zero it, then weigh the item. If problems persist, recalibrate the scales correctly.
Why is the RS232 interface not working on OHAUS ANALYTICAL Plus Scales?
If the RS232 interface is not working on your OHAUS Scales, the print menu settings may not be properly set up, or there could be cable connection issues. Verify that the interface settings in the Print menu correspond to those of the peripheral device and check the cable connections.
What to do if unable to change settings on OHAUS ANALYTICAL Plus?
If you're unable to change settings on your OHAUS Scales, the lock might be set to ON. (LFT set ON) Set the Lock switch to OFF to enable changes.
Why OHAUS Scales giving unstable readings?
If you're getting unstable readings on your OHAUS Scales, it could be due to vibration on the table surface. Place the balance on a stable surface or change the averaging level.
What to do if unable to store menu settings on OHAUS Scales?
If you cannot store menu settings/changes on your OHAUS Scales, make sure you are using the End function to exit the menus. You MUST use End to exit menus and save settings.
Describes the Ohaus ANALYTICAL Plus Series balances and their key features.
Introduces the main menu categories: Calibration, User, Setup, and Print.
Instructions for unpacking, checking contents, and environmental setup.
Covers leveling the balance and installing the pan assembly.
Details RS232 interface and power connection.
Explains the balance's self-test cycle upon power-up.
Explains button functions, menu navigation, and display indicators.
Covers stabilization, basic weighing, and taring.
Details Percent Weighing, Parts Counting, Check Weighing, etc.
Instructions for printing data, time, and date.
Explains calibration methods (Auto, User, Test).
Settings for environmental conditions and balance parameters.
Customization of units, functions, and options.
Configuration for communication, print options, and GLP.
Guidelines for maintaining the balance.
Common problems, causes, and remedies.
Reference for error codes and their solutions.
Contacting service and technical specifications.
To Next Page
General