Need help?Do you have a question about the OHAUS MB120 and is the answer not in the manual?
General| Maximum Capacity | 120 g |
|---|---|
| Readability | 0.001 g |
| Heating Technology | Halogen |
| Pan Size | Ø 90 mm |
| Calibration | External Calibration |
| Operating Temperature Range | 10°C to 40°C |
| Operating Humidity | 10% to 80% RH, non-condensing |
| Linearity | ± 0.002 g |
| Repeatability (Std. Dev.) | 0.001g |
| Display | 4.3 inch |
| Connectivity | RS232 |
| Power Supply | 100 - 240 V AC, 50/60 Hz |
Overview of the service manual's content and purpose.
Essential safety guidelines for servicing the moisture analyzer.
Lists necessary tools and equipment for servicing.
Details the technical specifications of the MB90/MB120 Moisture Analyzer.
Guides users through navigating the analyzer's setup menus.
General approach to diagnosing and resolving issues.
Table listing symptoms, possible causes, and remedies for common problems.
Procedures for performing operational and performance tests.
Guidelines for regular upkeep and cleaning of the analyzer.
Step-by-step instructions for disassembling the analyzer.
Procedure for replacing the power supply and switch.
Detailed steps for replacing the load cell assembly.
Instructions for accessing and replacing heating chamber components.
Introduction to the final verification process.
Procedure to check basic functionality after servicing.
Procedures for testing precision, repeatability, and linearity.
Exploded view and list of serviceable components.
Procedure for calibrating the analyzer's weight.
Procedure for calibrating the analyzer's temperature.
Procedure to restore scale data from EEPROM.
Instructions for replacing the main circuit board.
Instructions for replacing the control board.
Overview of diagnostic functions and commands.
Information on firmware compatibility and sources.
Steps for downloading and installing firmware updates.
Procedure for clearing the analyzer's software.
Instructions for resetting user passwords.
To Next Page
