Need help?Do you have a question about the OHAUS MB90 and is the answer not in the manual?
General| Maximum Capacity | 90 g |
|---|---|
| Readability | 0.001 g |
| Pan Size | 90 mm |
| Heating Technology | Halogen |
| Temperature Increments | 1°C |
| Calibration | External calibration |
| Power Supply | AC Adapter |
| Weight | 4.6 kg |
| Display | 4.3" TFT Touchscreen |
| Connectivity | RS232 |
| Moisture Content Range | 0 % to 100 % |
| Solids Content Range | 0.00% to 100% |
| Weighing Units | g |
| Operating Temperature Range | 10 °C – 40 °C |
| Power Requirements | 100 – 240 V AC, 50/60 Hz |
| Dimensions | 210 mm x 350 mm x 180 mm |
| Temperature Range | 40 °C – 200 °C |
Provides an introduction to the MB90 Halogen Moisture Analyzer and OHAUS.
Details the features and capabilities of the MB90 Moisture Analyzer.
Explains the thermogravimetric principle behind moisture analysis.
Explains the meaning of signal words and warning symbols used in the manual.
Provides essential safety notes related to operating the MB90 Moisture Analyzer.
Instructions for unpacking the instrument and verifying all accessories are present.
Guidance on choosing an appropriate environment for the Moisture Analyzer.
Steps for assembling the sample chamber components of the analyzer.
Procedure for ensuring the instrument is horizontally positioned for accurate results.
Instructions for safely connecting the moisture analyzer to a power source.
How to turn the display on/off and manage standby mode for the analyzer.
Access and manage saved drying methods and parameters.
View, recall, sort, and display measurement results.
Configure instrument settings, calibration, and system parameters.
Access help features and level assist.
Locks settings to prevent accidental changes after configuration.
Procedures for calibrating the instrument's weight and temperature.
Customize language, brightness, and sound preferences.
Configure date, time, peripherals, printing, GLP/GMP data, and touch screen.
Manage export/import, backup/restore, event logs, and factory reset.
Steps to calibrate the balance using an external weight.
View records of past weight calibration procedures.
Procedure for calibrating the temperature sensor using a calibration kit.
View records of past temperature calibration procedures.
Select the display language for the instrument interface.
Adjust the screen brightness level.
Adjust the volume of audible alerts and beeps.
Set the instrument's date and time for accurate record keeping.
Configure communication settings for USB and RS232 interfaces.
Configure automatic printing and interval settings.
Define company, department, and instrument ID for GLP/GMP compliance.
Calibrate the touch screen for accurate input.
Manage instrument settings and methods by exporting or importing.
Back up and restore instrument settings and data.
Export logs of instrument events for review.
Reset the instrument to its original factory default settings.
Update the instrument's firmware from a file.
Load, edit, or delete saved measurement methods.
Create a new method by entering a name.
Select between Standard and Fast drying profiles.
Set the desired drying temperature for the measurement.
Choose how the instrument automatically stops the drying process.
Select the unit of measurement to be displayed (%MC, %DC, %RG, g).
Set a target weight for sample consistency and measurement initiation.
Define whether measurements start automatically or manually.
Instructions for using and editing the pre-installed default method.
Export and import custom methods to/from storage.
View and manage all recorded test results.
View detailed data and graphical curves for individual test results.
Analyze test results statistically (mean, deviation, etc.).
Export individual or all test results for external analysis.
Guidance on adjusting the instrument's level feet.
Lists RS232 commands for data output.
Details the pin-out connections for the RS232 connector.
Instructions for cleaning the instrument's internal and external parts.
Procedure for replacing a blown power line fuse.
Diagnosing and resolving common problems with the moisture analyzer.
Contact information for authorized service agents.
List of available optional accessories for the moisture analyzer.
Specifies environmental conditions for operating the instrument.
Detailed technical specifications of the MB90 Moisture Analyzer.
To Next Page
