OHAUS Defender T24PE - User Manual

Questions and Answers

S
Shannon BauerAug 12, 2025
What does 'CAL E' mean on OHAUS Defender T24PE Measuring Instruments?
- J
  Juan EllisAug 12, 2025
  The 'CAL E' message on OHAUS Measuring Instruments indicates that the calibration value is outside of allowable limits.
B
benjamin11Aug 15, 2025
Why is the battery icon flashing on my OHAUS Defender T24PE?
- C
  caroline03Aug 15, 2025
  The battery icon flashes on your OHAUS Measuring Instruments because the battery is empty.
V
vfigueroaAug 19, 2025
What does Error 8.4 mean on OHAUS Defender T24PE Measuring Instruments?
- B
  bonniehallAug 19, 2025
  Error 8.4 on OHAUS Measuring Instruments means the weight reading is below the underload limit.
C
catherine57Aug 23, 2025
What does 'rEF.Err' mean on OHAUS Defender T24PE Measuring Instruments?
- J
  John HarmonAug 23, 2025
  The 'rEF.Err' message on OHAUS Measuring Instruments indicates that the reference weight is too small. Specifically, the weight on the pan is too small to define a valid reference weight.
N
Norma WoodardAug 27, 2025
What does Error 8.1 mean on OHAUS Defender T24PE Measuring Instruments?
- D
  daniel02Aug 27, 2025
  Error 8.1 on your OHAUS Measuring Instruments indicates that the weight reading exceeds the Power On Zero limit.
C
Christine ChaseAug 31, 2025
What does Error 8.2 mean on OHAUS Defender T24PE?
- R
  Rachel HallAug 31, 2025
  Error 8.2 on your OHAUS Measuring Instruments means that the weight reading is below the Power On Zero limit.
L
Linda LeeSep 4, 2025
What does Error 8.5 mean on my OHAUS Measuring Instruments?
- A
  Andrew JoyceSep 4, 2025
  Error 8.5 on your OHAUS Measuring Instruments means that the device was tared at one unit, but after switching to another unit, the tare value exceeds the maximum.
N
Nicolas HoltSep 7, 2025
What does 'Lo.rEF' mean on OHAUS Measuring Instruments?
- W
  wjohnsonSep 7, 2025
  The 'Lo.rEF' message on OHAUS Measuring Instruments is a warning that the Average Piece Weight is too small.

Summary

OHAUS 2000 Series Indicators Instruction Manual

1. Introduction to the OHAUS Indicator

Essential Safety Precautions

Outlines critical safety guidelines for the safe installation and operation of the indicator.

1.3 Parts and Controls Overview

1.4 Control Functions

2. Installation Guide

External Connection Procedures

3. Settings and Configuration

3.3 Calibration Menu Procedures

3.4 Setup Menu Configuration

3.5 Readout Menu Customization

3.6 Mode Menu for Applications

3.8 Print Menu Setup

4. Operation Guide

Turning Indicator On and Off

Zero Operation Methods

Explains automatic and manual zeroing procedures for accurate measurements.

Manual Tare Function

Details how to use the tare function to exclude container weight.

4.6 Application Modes Explained

5. Serial Communication

Interface Commands Reference

6. Legal for Trade Compliance

7. Maintenance and Troubleshooting

Troubleshooting Common Errors

Lists error codes, their descriptions, and potential causes for troubleshooting.

8. Technical Specifications

Indicator Specifications

Details the technical specifications of the T24PE indicator, including capacity, resolution, and power.

OHAUS Defender T24PE Specifications

General

Capacity	24 kg
Display	LCD
Housing Material	ABS plastic
Protection	IP54
Calibration	External calibration
Interface	RS232
Power Supply	AC adapter
Operating Temperature	0°C to 40°C
Units of Measurement	g, kg, lb, oz
Approvals	CE
Functions	Weighing