Need help?Do you have a question about the OHAUS 2000 Series and is the answer not in the manual?
General| Brand | OHAUS |
|---|---|
| Model | 2000 Series |
| Category | Measuring Instruments |
| Language | English |
Lists essential safety precautions for the safe and dependable operation of the equipment.
Explains the primary (short press) and secondary (long press) functions of the control buttons.
Describes the menu navigation functions (Yes, No, Back, Exit) for menu and calibration modes.
Details how to connect the load cell cable from the scale base to the indicator.
Explains how to connect the AC adapter to the indicator and a power outlet.
Details the process for performing zero calibration with no load on the scale.
Explains how to perform span calibration using a calibration mass.
Guides through linearity calibration using three fixed calibration points.
Details how to set the scale's maximum capacity.
Explains how to set the scale's readability (graduation).
Enables or disables the Parts Counting application mode.
Enables or disables the Totalization application mode.
Explains how to turn the indicator on and off using the ON/ZERO Off button.
Describes the conditions and methods for setting the zero point of the scale.
Explains how to perform a manual tare operation and clear the tare value.
Describes the basic weighing operation and returning to weighing mode.
Explains how to use the indicator for parts counting and APW.
Details how to use the Totalization mode for cumulative weight measurement.
Procedure to set the indicator for legal for trade use, including security switch.
Information on product inspection requirements for trade approved applications.
Describes how official seals can be applied to the indicator for security.
Lists common error codes, their descriptions, and potential causes.
To Next Page
