EasyManua.ls Logo

OHAUS Navigator NV123 User Manual

OHAUS Navigator NV123
21 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Navigator
TM
Series Balances
Instruction Manual
Balanzas serie Navigator
TM
Manual de instrucciones
Balances de la série Navigator
TM
Bedienungsanleitung
für die Waagen der Navigator
TM
-Serie
Bilance Serie Navigator
TM
Manuale pe
Question and Answer IconNeed help?

Do you have a question about the OHAUS Navigator NV123 and is the answer not in the manual?

OHAUS Navigator NV123 Specifications

General IconGeneral
Capacity120 g
Readability0.001 g
DisplayLCD
CalibrationExternal
Linearity±0.002 g
Repeatability±0.001 g
InterfaceRS232
Power SupplyAC adapter or 4 AA batteries
Weighing Unitsct, dwt
Unitsg, oz, ozt, dwt, ct

Summary

1. Introduction

1.1 Definition of Signal Warnings and Symbols

Explains symbols for hazards (warning, caution, attention) and electrical shock.

1.2 Safety Precautions

Lists general safety guidelines for installation, operation, and maintenance.

1.3 Intended Use

Defines the proper and improper uses of the instrument.

1.4 Controls

2. Installation

2.1 Transportation Lock

Explains how to use the transportation lock to secure the balance.

2.2 Location

Provides guidance on selecting a suitable and stable environment for the balance.

2.3 Power

Describes how to connect the AC adapter and install batteries for power.

Optional rechargeable battery

2.4 Initial Calibration

3. Operation

3.1 Weigh Mode

Instructions for performing basic weighing operations.

3.2 Parts Counting Mode

How to use the balance for counting a number of identical items.

3.3 Percent Mode

Instructions for measuring weight as a percentage of a reference weight.

3.4 Checkweigh Mode

4. Settings

4.1 Menu Navigation

Explains how to navigate and change settings within the user menu.

4.2 Cal Sub-Menu

4.3 Setup Sub-Menu

4.4 Mode Menu

4.5 Units Menu

4.6 Sealing access to balance settings

5. Maintenance

5.1 Cleaning

Safety warnings and instructions for cleaning the balance exterior.

5.2 Troubleshooting

A table listing common symptoms, causes, and remedies for balance issues.

5.3 Service Information

Contact details and procedures for obtaining technical support or service.

6. Technical Data

Equipment Ratings

Lists environmental and electrical ratings for the instrument.

6.1 Specifications (Non-approved Models)

6.1 Specifications (continued)

6.1 Specifications (continued)

6.1 Specifications (Approved Models)

6.2 Drawings

Balance Dimensions

Provides dimensional drawings and measurements for different balance models.

6.3 Compliance

Markings and Standards

Details product compliance with EU directives, WEEE, and EN standards.

Verified weighing instruments in the EU

Information on verification requirements for instruments used in trade.

FCC Note

FCC compliance statement regarding digital device emissions and interference.

Industry Canada Note

ISO 9001 Registration

Limited Warranty

Warranty Terms

Outlines the terms and conditions of the OHAUS product warranty.

Product Registration

Instructions on how to register the product for warranty and investment protection.

Related product manuals