How to fix OHAUS Scales that cannot turn on?
If your OHAUS Scales won't turn on, the issue is likely due to a lack of power. Verify the connections and voltage to ensure the scale is receiving power.
What to do if OHAUS Scales cannot calibrate?
If you cannot calibrate your OHAUS Scales, the issue might stem from an unstable environment or using an incorrect calibration weight. Try moving the balance to a more stable location. If that doesn't work, make sure you are using the correct calibration weight.
What does 'Lo ref' mean on OHAUS Scales?
If your OHAUS Scales display 'Lo ref', it means the reference weight is too low. Increase the reference weight to resolve this issue.
Why can't I access a mode on my OHAUS Navigator NV622 Scales?
If you cannot access a specific mode on your OHAUS Scales, it is possible that the mode is not enabled. Enter the menu and enable the desired mode.
Why can't I access a unit on my OHAUS Scales?
If you cannot access a specific unit on your OHAUS Scales, it is possible that the unit is not enabled. Enter the menu and enable the unit.
General| Capacity | 620 g |
|---|---|
| Readability | 0.01 g |
| Display | LCD |
| Repeatability | 0.01 g |
| Stabilization Time | 2 seconds |
| Interface | RS232 |
| Weighing Units | g, oz |
| Power Supply | AC adapter or batteries |
| Calibration | External |
| Operating Temperature | 10°C to 40°C |
Lists essential safety instructions for installation, operation, and maintenance.
Details the buttons, functions, and IR sensor of the balance interface.
Guidelines for choosing a suitable operating location and leveling the balance.
Step-by-step guide for performing the initial calibration procedure.
Options for span and linearity calibration procedures.
Common issues, causes, and remedies for balance problems.
To Next Page
