How to fix OHAUS Navigator NVT6201 Scales that cannot turn on?
If your OHAUS Scales won't turn on, the issue is likely due to a lack of power. Verify the connections and voltage to ensure the scale is receiving power.
What to do if OHAUS Navigator NVT6201 cannot calibrate?
If you cannot calibrate your OHAUS Scales, the issue might stem from an unstable environment or using an incorrect calibration weight. Try moving the balance to a more stable location. If that doesn't work, make sure you are using the correct calibration weight.
What does 'Lo ref' mean on OHAUS Scales?
If your OHAUS Scales display 'Lo ref', it means the reference weight is too low. Increase the reference weight to resolve this issue.
Why can't I access a mode on my OHAUS Scales?
If you cannot access a specific mode on your OHAUS Scales, it is possible that the mode is not enabled. Enter the menu and enable the desired mode.
Why can't I access a unit on my OHAUS Navigator NVT6201?
If you cannot access a specific unit on your OHAUS Scales, it is possible that the unit is not enabled. Enter the menu and enable the unit.
General| Capacity | 6200 g |
|---|---|
| Readability | 0.1 g |
| Display | LCD |
| Calibration | External Calibration |
| Power Supply | AC Adapter |
| Stabilization Time | 1 sec |
| Operating Temperature | 0 to 40 °C |
| Units of Measurement | g, kg, oz, lb |
| Interface | RS232 |
Essential safety guidelines for installation, operation, and maintenance.
Step-by-step procedure for calibrating the balance upon first use.
Basic instructions for performing standard weighing operations.
How to use the balance for counting items by weight.
Instructions for measuring samples as a percentage of reference weight.
Options for span and linearity calibration procedures.
Identifies common problems, causes, and remedies.
To Next Page
