How to fix OHAUS Navigator NV222 Scales that cannot turn on?
If your OHAUS Scales won't turn on, the issue is likely due to a lack of power. Verify the connections and voltage to ensure the scale is receiving power.
What to do if OHAUS Scales cannot calibrate?
If you cannot calibrate your OHAUS Scales, the issue might stem from an unstable environment or using an incorrect calibration weight. Try moving the balance to a more stable location. If that doesn't work, make sure you are using the correct calibration weight.
What does 'Lo ref' mean on OHAUS Scales?
If your OHAUS Scales display 'Lo ref', it means the reference weight is too low. Increase the reference weight to resolve this issue.
Why can't I access a mode on my OHAUS Navigator NV222 Scales?
If you cannot access a specific mode on your OHAUS Scales, it is possible that the mode is not enabled. Enter the menu and enable the desired mode.
Why can't I access a unit on my OHAUS Navigator NV222 Scales?
If you cannot access a specific unit on your OHAUS Scales, it is possible that the unit is not enabled. Enter the menu and enable the unit.
Outlines critical safety measures for installation, operation, and maintenance to prevent injury.
Details the function of each button on the balance, including short and long press actions.
Details how to connect the AC adapter and install batteries for powering the balance.
Warns about the risk of explosion if the rechargeable battery is incorrectly replaced or connected.
Explains how to use the balance for basic weighing operations, including taring.
Provides instructions on how to navigate the user menu and select various settings.
Lists common symptoms, their possible causes, and remedies for troubleshooting balance issues.
To Next Page
General