What to do if OHAUS Touch Panel displays Error 8.3?
If the OHAUS Touch Panel displays 'Error 8.3', it indicates the weight reading exceeds the overload limit. Reduce the load on the scale to resolve this issue.
How to fix OHAUS Touch Panel when it will not turn on?
If the OHAUS Touch Panel unit doesn't turn on, first ensure the power cord is securely plugged into both the device and a functioning power outlet. Check the power source to confirm it's supplying electricity. If the issue persists, service is required, as there may be another failure.
What does Err 7.0 mean on OHAUS Accessories?
Err 7.0 indicates an unstable weight reading when defining reference weight. This is an unstable error, so check the platform location.
What does Err 5.0 mean on OHAUS Accessories and how to fix it?
Err 5.0 on your OHAUS Accessories indicates that the display value is greater than 999999 in parts counting mode. To resolve this, reduce the number of parts.
Why can't I change the weighing unit on my OHAUS Accessories?
If you cannot display the weight in your desired weighing unit on your OHAUS Accessories, make sure the unit is set to On in the Units Menu.
How to unlock menu settings on OHAUS Accessories?
If you cannot change the menu settings on your OHAUS Accessories, the menu may be locked. Set the selected menu to Off in the Lock Menu. Also, check that the Lock switch is set to the off position.
Why won't my OHAUS Accessories turn on?
If your OHAUS Accessories unit isn't turning on, first ensure the power cord is correctly plugged into both the unit and a functioning power outlet. If the power cord is properly connected, verify that the power outlet is supplying electricity.
What does LOW.rEF mean on OHAUS Touch Panel?
General| Brand | OHAUS |
|---|---|
| Model | T32ME |
| Category | Touch Panel |
| Language | English |
To Next Page
