PAGE 31
© 2014 OJ Electronics A/S
10.1 Heating Schedule 1/2
The heating schedule allows you to control the temperature automatically accord-
ing to a programed schedule of your choice. The thermostat comes with a pre-
programed heating schedule for easy and economic heating control, see Preset
Schedule under Factory Settings.
1. Tap the “Menu” button on the home screen.
2. Then tap the “Heating Schedule” button to access the various schedule options.
This screen consists of a list of six events and four buttons. Each event is num-
bered, and the start time, target temperature/setpoint, and activity status are dis-
played. “Back”, “ Copy to…”, “Arrow Left”, and “Arrow Right” buttons are located
in the corners of the screen. The day for which the event applies is displayed at the
bottom of the screen.
Grayed out events marked with a red “X” are not currently in use.
3. To change the start time, temperature, and activity status for a specific event, tap
on the event to the right of the number.
4. To change the start time for the event, tap the “Arrow Up” and “Arrow Down”
buttons.
5. To change the temperature for the event, tap the “Arrow Up” and “Arrow Down”
buttons.
6. To toggle between the event being active or inactive, tap the “The event is ac-
tive” or “The event is inactive” button. The text shown on the button reflects the
current activity status of the event. Note! Event 1 is always active.
7. Confirm your choice with “√” or discard it with “X”.
To Next Page
Loading...
Need help?
General
