OJ Electronics UDG4 - Sensor Application 2;2

PAGE 51
© 2014 OJ Electronics A/S
Maximum temperature depends on the floor type and temperature unit.
1. Tap the “Menu” button on the home screen.
2. Then tap the “Installer Settings” button to access the various installer settings.
3. Tap the “Sensor Application” button.
4. Tap the application that you want to use.
 • Floor
 • Room/FloorProtection
 • Room
 • Regulator
5. Confirm your choice with “√” or discard it with “X”.
The thermostat will automatically return to “Installer Settings”.
10.4.3 Sensor Application 2/2