Oki B2200 User Manual

Print media > 10
5. Slide the paper stack fully into the tray as far as it will go,
print side downwards, top edge into the printer, and
ensure the guides just touch each side of the stack.
6. Close the tray cover.
L OADING PAPER IN THE MANUAL FEEDER
1. In your computer’s Print dialogue, click the printer
[Properties] button to display the Printing Preferences
dialogue.
2. On the Setup tab, choose the correct size for your paper,
set the source to [Manual] (you can click on the manual
feeder in the printer graphic if you prefer).
3. On the Job Options tab, set the correct Orientation for
your document. [Landscape] rotates the page image 90°
left.
4. Click [OK] to close the Printing Preferences dialogue
and click [OK] to close the Print dialogue and print the
document.
The paper feed light will flash, prompting you to load the
paper. Adjust the paper guides to the width of the paper.
They should lightly touch each side edge of the paper but
not grip it tightly.

Oki B2200 Specifications

Performance

Print Speed	21 pages per minute
CPU	266 MHz
Time to First Page	6.0 seconds
Print Resolution	1200 x 600 dpi
Duty Cycle	15, 000 pages per month

Memory

Standard/Maximum RAM for B2200n and B2400n	16 MB
Standard/Maximum RAM for B2200 and B2400	8 MB

Paper Handling

Main Paper Tray Capacity	150 sheets
Manual Bypass Capacity	1 sheet
Paper Size	3.5" x 5.8" min. to 8.5" x 14" max.
Standard Paper Output	30 sheets
Paper Weight for Main Tray	16 lb. – 28 lb. bond
Paper Weight for Manual Bypass	16 lb. – 32 lb. bond

Power Consumption

Power Consumption Peak	660W
Power Consumption Typical Operation	360W
Power Consumption Idle	60W

Weight and Dimensions

Dimensions	12.6" x 8.0" x 7.1" (32.0 cm x 20.4 cm x 18.1 cm)
Weight	9.3 lb. (4.2 kg)