41 > B401/B411/B431
Network menu: B431dn Printer Menu
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
Note
This applies only to the B431dn model.
ITEM DEFAULT REMARKS
TCP/IP ENABLE
IP VERSION IP v4
NETBEUI DISABLE
NETBIOS OVER TCP ENABLE
NETWARE ENABLE
ETHERTALK ENABLE
FRAMETYPE AUTO
IP ADDRESS SET AUTO
IP ADDRESS xxx.xxx.xxx.xxx
SUBNET MASK xxx.xxx.xxx.xxx
GATEWAY ADDRESS xxx.xxx.xxx.xxx
WEB ENABLE
TELNET DISABLE
FTP DISABLE
SNMP ENABLE
NETWORK SCALE NORMAL
HUB LINK SETTING AUTO NEGOTIATE
TCP ACK TYPE1
FACTORY DEFAULTS EXECUTE
To Next Page
Loading...
