68 > B401/B411/B431
PCL emulation
The tabs available are the Setup Tab, the Job Options Tab and
the Image Tab.
Setup tab
1. Paper size should be the same as the page size of your
document (unless you wish to scale the printout to fit
another size), and should also be the same as the size of
paper you will feed into the printer.
2. You can choose the source of the paper to feed, which may
be Tray 1 (the standard paper tray), Manual Feed Tray
(B401/B411), Tray 2 (B411/B431 only) (if you have the
optional second paper tray installed) or the Multi Purpose
Tray (B431). You can also click on the appropriate part of
the screen graphic to select your preferred tray.
3. A variety of document finishing options can be selected,
such as normal one page per sheet, or N-up (where N can
be 2 or 4) for printing scaled down pages at more than one
page per sheet.
To Next Page
Loading...
