106 > B411/B431 Consumables and Maintenance
2. Holding it by its top centre, remove the used image drum
and toner cartridge, out of the printer.
3. Put the assembly down gently onto a piece of paper to
prevent toner from marking your furniture and to avoid
damaging the green drum surface.
CAUTION!
The green image drum surface at the base of the ID
unit is very delicate and light sensitive. Do not touch
it and do not expose it to normal room light for more
than 5 minutes. If the drum unit needs to be out of
the printer for longer than this, please wrap the
cartridge inside a black plastic bag to keep it away
from light. Never expose the drum to direct sunlight
or very bright room lighting.
To Next Page
Loading...
