Oki B710 - User Manual

Questions and Answers:

M
Mr. Darrell CampbellAug 13, 2025
What to do if Oki B710 All in One Printer is waiting but not printing?
- K
  Kenneth PriceAug 13, 2025
  If your Oki All in One Printer displays 'Waiting' but isn't printing, it's likely waiting for data. This can happen when a job lacks the usual termination signals. To resolve this, press and hold the button for 3 seconds. This will flush the job buffers and finish the print job. Alternatively, the printer will automatically flush the buffers after a timeout, which is usually 20 seconds by default.
J
julielittleAug 20, 2025
Why does my Oki All in One Printer have no power?
- S
  sara85Aug 20, 2025
  If your Oki All in One Printer isn't getting power, first, make sure the printer is turned on. If it is on, check the power cord to ensure it's properly connected to both the printer and a working power outlet. Also, verify that the power outlet provides the correct voltage as indicated on the printer's label.
S
Susan FrazierAug 25, 2025
Why is my Oki B710 printing so slowly?
- J
  Jeffrey PerezAug 25, 2025
  If your Oki All in One Printer is printing slowly, especially with high-resolution documents, try reducing the memory capacity of unused items. Disabling unused ports can free up memory. Also, if the printer driver is set to [1200dpi] on the [Graphics] tab, changing it to [600dpi] will shorten the print time. If you are printing with TrueType fonts, changing the printing method for TrueType fonts in [Specify Font] on the [Detailed Settings] tab of the printer driver may help.
C
Christopher JohnsonAug 27, 2025
What to do if my Oki B710 is making a strange noise?
- I
  iherreraAug 27, 2025
  If your Oki All in One Printer makes a strange noise, make sure the printer is placed on a stable, flat surface. Check that cover A is securely closed and that the paper tray is completely pushed into the printer. Inspect the inside of the printer for any foreign objects, and if found, turn off the power and remove them. If you cannot remove the object without disassembling the printer, contact service.
M
Michael RogersAug 31, 2025
How to prevent envelope wrinkling in Oki All in One Printer?
- N
  Nicole HarrisAug 31, 2025
  If envelopes are getting wrinkled when printed with your Oki All in One Printer, it could be due to the type of envelopes being used. To reduce wrinkling, open cover B and lift up the levers at both ends of the fuser unit. Remember to return the levers to their original positions after printing the envelope.
R
rogerskevinSep 4, 2025
Why won't my Oki B710 feed paper?
- B
  Bryan AllenSep 4, 2025
  If your Oki All in One Printer isn't feeding paper correctly, ensure the paper is loaded correctly. For labels, transparencies, or envelopes, fan them well before loading. Make sure you are using the correct type of paper and that the paper tray is correctly set and pushed completely into the printer. Also, check that the printer is on a flat surface and that the paper tray guides are in the correct positions. If you've used picture papers, clean the feed roll. If paper is feeding more than one sheet at a time, remove the paper, fan it, and reload it, replenishing only when the tray is empty.
C
Christina SampsonSep 8, 2025
What does it mean when the ATTENTION light is on on my Oki All in One Printer?
- E
  Evelyn ScottSep 8, 2025
  If the ATTENTION light is on your Oki All in One Printer, check the control panel for an error message and rectify the error.

Oki B710 Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Connectivity	USB, Ethernet
Functions	Print
Operating System Compatibility	Windows, Mac