B710 B720 B730 User’s Guide > 108
Disk Unformatted Error message displayed when unformatted disk
is detected.
Drive Full Error The storage device that you are trying to copy to
is full.
Duplex Failure Duplex Unit Failure.
Engine NV Fail Call for service.
Exit Jam Paper jam detected
Face Up Failure Error message displayed for Face-Up tray unit
failure.
Fan Failure Error message displayed for Fan Failure.
File Error Status display for “File Error xx” (where xx is
error code).
File Not Found Could not find a filter configuration file.
Filter Error Displayed on line 1, detail of error on line 2.
Firmware Upgrade Indicates “Firmware Upgrade” mode is active.
Format Error Failure during attempted format of flash.
Formatting Status display for file status.
Fuser Failure Error message for Fuser Failure.
ID Mismatch Displayed for OEM ID Mismatch on EP Cartridge.
Incompatible
Duplexer
Incompatible Duplex Option Installed
Incompatible OCT Incompatible Offset Catch Tray Option Installed
Incompatible Tray 3 Incompatible Tray 3 Option Installed
Incompatible Tray 4 Incompatible Tray 4 Option Installed
Initializing Displayed during Power-on Initialization.
Insert Tray Recovery action displayed when tray needs to be
inserted
Install/Reset Recovery message displayed for ROS failure.
Call for service.
Load Paper Un-specific “Load Paper” prompt.
Load Paper Tray 1 A user prompt that paper needs to be put into
Tray 1.
Message Condition/Reason/Action