Oki B731 User Manual

- 106 -
Other Error Messages
4
Troubleshooting
Error
code
Message
<ATTENTION>
indicator
Cause/Remedy
Warning □
Cannot read the le
Press ONLINE Button
Lights up Cannot read the le from USB Memory
while printing from USB Memory. The USB
Memory may be pulled out, or damaged, or
le cannot open.
Error
480
Remove Paper
Facedown Stacker
Please see HELP for details
Blink The printed paper is overlled on the paper
stacker of the printer unit.
Error
420
Press ONLINE Button for Restoration
Memory Overow
Please see HELP for details
Blink Memory capacity overows.
Error
517
Wireless startup failed
Press ONLINE Button
Please see HELP for details
Blink An error occurred at the communication
with wireless bridge. For example, response
timeout, etc.
This status only for wireless LAN model.
Error
504
This wireless rmware version does
not operate on this device
Press ONLINE Button
Please see HELP for details
Blink The major version is not the same with
wireless bridge.
This status only for wireless LAN model.
Error
505
Wireless settings are incomplete
Press ONLINE Button
Please see HELP for details
Blink Wireless LAN can not startup. Some setting
need to be re-congured.
This status only for wireless LAN model.
Error
506
(ONLINE)
Not connected to wireless access
point
Press ONLINE Button
Please see HELP for details
Blink Can not setup communication with an
Access Point(there is not an usable AP).
This status only for wireless LAN model.
Error
(ONLINE)
Check Data
Message Data Write
Error<%CODE%>
Lights up Indicates that writing of message data to be
uploaded has been failed.
Error
519
(ONLINE)
Press ONLINE Button for Restoration
Receiving Data Timeout
Please see HELP for details
Blink When receiving data by Port9100, LPR, FTP,
IPP, WSD, or Email, a timeout occurred.
Error
(ONLINE)
Firmware Update Error
Please try again
If network doesn’t work, please try
rmware update over USB
Lights up FW Update was failed.
When this error occured, the FW Update
needs to be executed again, and the printer
needs to keep ONLINE.
Error
581
Faceup Stacker Open
Duplex Not Available
Please see HELP for details
Blink It is occurred when duplex printing pages
are added at the faceup stacker cover
opened.
Error
440
441
442
Install Paper Cassette
%TRAY%
Please see HELP for details
Blink Indicates removal of the paper cassette of
Tray 1 that is a paper path in attempting to
print from Tray 2, 3, or 4.
Error 440 : Tray1
Error 441 : Tray2
Error 442 : Tray3

Oki B731 Specifications

General

Print Technology	LED
Resolution	1200 x 1200 dpi
Memory	256 MB
Connectivity	USB, Ethernet
Paper Capacity	630 sheets
Duplex Printing	Standard
Memory Maximum	768 MB