- 87 -
When an Error Message is Displayed on the Display Screen
4
Troubleshooting
3 Open the rear cover (4) by pulling the
lock (3) lever on the back side of the
printer toward you.
3
4
4 Check for jammed paper inside the
printer. If jammed paper remains,
remove it.
5 Return the rear guide (5) to its original
position then close the rear cover (4).
4
5
6 Insert your nger into the recess on
the right side of the printer and pull the
front cover open lever (1) to open the
front cover (2) forward.
Note
● Open the front cover gently. If you open it rapidly,
the MP Tray may open.
1
2
7 Pull out the duplex unit (7) by holding
the grips (6) on its both sides.
6
6
7
Note
● The duplex unit cannot be removed. If it is forcibly
removed, it may be damaged.
To Next Page
Loading...
