31
Some of the more common error
messages appear below. For
additional error messages, see
“Error Messages” under
“Troubleshooting” in your on-line
User’s Guide.
XXX TONER SENSOR ERROR
Appears on the second line of the
display to indicate that the lever for
the toner cartridge color indicated
is not pushed all the way back.
What to Do
Open the cover. Push the lock lever
toward the back of the printer as
far as it will go. Close the cover. If
this does not clear the message,
call your local service dealer.
XXX TONER LOW
Appears on the second line of the
display to indicate that color
xxx
toner cartridge is getting low.
Note:
If you have changed the
LOW TONER item in the
SYSTEM CONFIG MENU to
STOP, the ATTENTION light
will blink and you must
either replace the toner
cartridge immediately or
press the ON LINE button to
continue printing.
What to Do
Be sure you have a replacement
toner cartridge (see page 2) on
hand.
INSTALL NEW TONER
nnn: XXXX TONER EMPTY
The toner cartridge indicated (
xxx
)
has run out of toner.
What to Do
Replace the toner cartridge.
XXXX DRUM NEAR LIFE
Appears on the second line of the
display to indicate that color
xxxx
(e.g,
black
) image drum needs to
be replaced.
What to Do
Replace the
xxxx
image drum. (See
the instructions supplied with the
new image drum.)
INSTALL ADDITIONAL MEMORY
420: MEMORY OVERFLOW
The amount of data in the file being
printed has exceeded the printer’s
memory.
What to Do
• Reduce the size of the file being
printed (e.g., print the file as
separate groups of pages instead
of all the pages at one time).
• Install additional memory in the
printer (see your on-line User’s
Guide for more information).
Error Messages
To Next Page
Loading...
Need help?
General
