11
Sample Ream Label:
Media Weight, US Bond (see page 4) [sometimes given as substance]
Media Weight, Metric: Look for this to confirm US Bond vs Index.
Specifications
Caution!
The ink on pre-printed letterhead stationery must be able to withstand
446°F (230°C) for 0.2 second, including mechanical pressures to 25 psi
(1.8 kg/cm
2
).
Important!
If you experience curling when printing a file in duplex mode, switch to
28-lb. US Bond paper.
Sizes Feed Tray Exit Tray Media Weight
Recommended Media
1
1. Weight designations in this column are US Bond.
•Letter
• Executive
•Legal-14
•Legal-13.5
•Legal-13
• A4, A5, A6
•B5
• Custom
2
2. Minimum = 3.94" x 5.83"; maximum = 8.5" x 14".
MP Tray Only: banners, one sheet at a time, 8.25 to 8.5 '' wide by up to 47.25''
long
Custom sizes must first be defined in the printer driver.
Tray 1 Top
Rear
•Light
•Medium
•Heavy
• Oki 52206101 Bright
White Proofing Paper,
32 lb. (see page 16)
• Hammermill Laser Printer
Radiant White,
24 lb.
• Xerox 4024, 20 lb.
MP Tray Rear Only
•Medium
•Heavy
Print Media
Paper