Macintosh> 31
N
ETWORK
C
ARD
S
ETUP
UTILITY
FOR
M
AC
OS X
The built in Network Interface Card is also supported in the
Macintosh OS X environment.
Run the installer on the driver CD to install the printer driver.
You can use the Oki Network Card Setup Utility (Macintosh) to
assign an IP address and configure the network interface card.
For more background information on the Network Card Setup
Utility, refer to the “Network Card Setup utility” on page 9 and,
on installation, the Network Card Setup utility On-line Help.
L
AUNCHING
THE
N
ETWORK
C
ARD
S
ETUP
UTILITY
Complete the following steps to launch the Network Card Setup
utility on Mac OS X:
1. Ensure that the printer is switched on and connected your
computer and to the network.
2. Insert the Software CD-ROM into the CD-ROM drive and
click on the CD icon on your desk-top.
3. Double-click on Utilities -> Network Card Setup -> English
-> Mac OS X.
4. Double-click on the Network Card Setup icon. The
“Discovering printers...” message appears. Once the
printer is detected, the “Network Card Setup” pane
launches, displaying the printer name and network
information.
5. For more information about the Network Card Setup,
follow the instructions outlined below or click the Help
button in the “Network Card Setup” pane.
To Next Page
Loading...
