Oki C5750 - Page 40

Menu functions > 40
USB MENU
This menu controls the operation of the printer’s USB data
interface.
N ETWORK MENU
This menu controls the operation of the printer’s 10Base-T/
100Base-TX network interface.
ITEM SETTINGS EXPLANATION
USB ENABLE /
DISABLE
ENABLES / DISABLES the USB port.
SOFT RESET ENABLE /
DISABLE
Enables or disables the SOFT RESET
command.
SPEED 12 / 480 Mps Selects the interface speed.
OFFLINE
RECEIVE
ENABLE /
DISABLE
OFFLINE RECEIVE.
SERIAL NUMBER ENABLE /
DISABLE
Specifies whether to ENABLE or
DISABLE a USB serial number.
The USB serial number is used to
identify the USB device connected to
your PC.
NOTE
When you have changed any settings in the USB MENU, turn
the printer OFF, then ON again.
ITEM SETTINGS EXPLANATION
TCP/IP ENABLE /
DISABLE
Enables or disables this network
protocol.
IP VERSION
IP V4 /
IPV 4 & V6
IPV 6
Sets up the IP version.
Operates with IPv4 only (not valid with
IPv6).
Operates with both IPv4 and IPv6.
Operates with IPv6 only (not valid with
IPv4).
NETBEUI ENABLE /
DISABLE
Enables or disables this network
protocol.