Oki C5750 User Manual

Menu functions > 41
NETWARE ENABLE /
DISABLE
Enables or disables this network
protocol.
ETHERTALK ENABLE /
DISABLE
Enables or disables this network
protocol.
FRAME TYPE AUTO / 802.2 /
802.3 /
ETHERNET II /
SNAP
Selects the Ethernet MAC layer frame
type.
IP ADDRESS
SET
AUTO /
MANUAL
Specifies whether IP address allocation
is automatic (DHCP) or manually
assigned.
IP ADDRESS xxx.xxx.xxx.xxx Current assigned IP address. To
change, press ENTER and use +/–
keys to increment 1st octet, then press
ENTER again to move on to next octet.
When 4th octet has been set, press
ENTER again to register new address.
SUBNET MASK xxx.xxx.xxx.xxx Current assigned subnet mask. To
change, proceed as above.
GATEWAY
ADDRESS
xxx.xxx.xxx.xxx Current assigned gateway address. To
change, proceed as above.
WEB ENABLE /
DISABLE
Enables or disables Web config. facility.
TELNET ENABLE /
DISABLE
Enables or disables Telnet config.
facility.
FTP ENABLE /
DISABLE
Enables or disables communication via
FTP.
SNMP ENABLE /
DISABLE
Enables or disables SNMP protocol.
NETWORK
SCALE
NORMAL /
SMALL
Selects network size.
When NORMAL is selected, printer can
work effectively, even when connected
to a HUB that has a spanning tree
feature. However, printer start up time
gets longer when computers are
connected with two or three small
LANs.
When SMALL is selected, computers
can cover from two or three small LANs
to a large LAN, but may not work
effectively when connected to a HUB
that has a spanning tree feature.
ITEM SETTINGS EXPLANATION

Oki C5750 Specifications

General

Brand	Oki
Model	C5750
Category	Printer
Language	English