Oki C612 - Page 38

Menu functions > 38
PCL Setup
(cont.)
Tru e Bl ack O n/Off Sets whether to use Composite Black (cmyk
mixed) or Pure Black (K only) for the black
(100%) in image data.
Off: Mode using Composite Black
On: Mode using Pure Black
(PCL only)
Pen Width Adjust On/Off When minimum width is specified in PCL,
sometimes a 1-dot line, looks broken.
With Pen Width Adjust set to On, when the
minimum width is specified, the line width
will be emphasized so as to look wider than a
1-dot line.
With Pen Width Adjust set to Off, the line will
appear as before.
Tray I D#
MPTray 1 ~ 4 ~ 59 Sets the # to specify the MP tray for the
paper feed destination command (ESC&l#H)
in PCL5e emulation.
Tray 1 1 ~ 5 ~ 59 Sets the # to specify Tray 1 for the paper
feed destination command (ESC&l#H) in
PCL5e emulation.
Tray 2 1 ~ 5 ~ 59 Sets the # to specify Tray 2 for the paper
feed destination command (ESC&l#H) in
PCL5e emulation.
(Displayed only if Tray 2 is installed).
Tray 3 1 ~ 20 ~ 59
Sets the # to specify Tray 3 for the paper feed
destination command (ESC&l#H) in PCL5e
emulation.
(Displayed only if Tray 3 is installed).
XPS Setup
DigitalSignature Print Invalid Sign
Print Only Valid
Sign
Off
Sets the DigitalSignature function. (Default:
Off)
Print Invalid Sign: If a document is
falsified, normal printing is done and a
falsification error report is printed.
Print Only Valid Sign: If a document is
falsified, only a falsification error report is
printed.
Off: Do not verify the signature.
DiscardControl Auto
Each Page
Off
Sets the DiscardControl function. (Default:
Auto).
Auto: Liberates resources as necessary.
Each Page: Liberates resources per page
according to the markup.
Off: Disables the DiscardControl function.
MC Mode On
Off
Sets the MarkupComaptibility function.
(Default: On)
On: Use the MarkupComaptibility function.
Off: Do not use the MarkupComaptibility
function.
ITEM SETTINGS EXPLANATION