Oki C710dn User Guide

Menu functions > 31
EPSON FX
Setup
Character
Pitch
10 CPI/12 CPI/
17 CPI
20 CPI/
Proportional
Specifies character pitch in Epson FX emulation.
Character
Set
SET-2
SET-1
Sets a character set.
Symbol Set IBM 437 Sets the Symbol Set for Epson FX Emulation.
(see machine operator panel for complete list).
Letter O
Style
Enable/Disable Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Zero
Character
Normal/Slashed Specifies the style of 0(zero). SLASHED: SLASH ZERO
Line Pitch 6/8 LPI Sets line space.
White Page
Skip
On/Off Sets whether to eject a blank sheet. Available only when
simplex is set.
CR Function CR/CR+LF Sets action when CR code is received.
Line Length 80/136 Column Specifies the number of characters per line.
Form Length 11/11.7/12 inch Specifies the length of paper.
TOF Position 0.0/0.1/~1.0
inch
Sets the position from the top edge of paper.
Left Margin 0.0/0.1/~1.0
inch
Sets the amount to shift the horizontal print start position
to the right.
Fit to Letter Enable/Disable Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Text He ight Same/Diff Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
Color Setup Ink
Simulation
Off
SWOP
Euroscale
Japan
The machine has its own process simulation engine which
simulates standard colors in the printer.
This function is available only with PS language jobs.
UCR Low
Medium
High
Selects limitation to the toner layer thickness.
If paper curl occurs in dark printing, selecting MEDIUM or
LIGHT sometimes helps reduce this curl.
UCR = Under Color Removal.
CMY 100%
Density
Enable/Disable Enable/Disable 100% output against the CMY100% TRC
compensation. Ordinarily, the TRC compensation function
holds control for the appropriate print density; thus 100%
output is not always possible.
Selecting ENABLE will enable 100% output in any
individual color. The actual print, including the TRC
compensation function is limited to an appropriate area.
This function is for special purposes such as specification
in CMYK color reduction in PS.
CMYK
Conversion
On/Off Setting to “OFF” will simplify the conversion process of
CMYK data, which will reduce the processing time.
This setting is ignored when Ink Simulation function is
used.
PS only
ITEM SETTINGS EXPLANATION

Oki C710dn Specifications

General

Brand	Oki
Model	C710dn
Category	Printer
Language	English