Menu functions > 30
IBM PPR
Setup
Character
Pitch
10 CPI
12 CPI
17 CPI
20 CPI
Proportional
Specifies character pitch in IBM PPR emulation.
Font
Condense
12CPI to
20CPI
12CPI to 12CPI
Specifies 12CPI pitch for Condense Mode.
Character
Set
SET-2
SET-1
Sets a character set.
Symbol
Set
IBM 437 Sets the Symbol Set for IBM PPR (see machine operator
panel for complete list).
Letter O
Style
Enable/Disable Specifies the style that replaces ø (9B) and ¥ (9D) with ø
(ou) and Ø (zero).
Zero
Character
Normal/Slashed Specifies the style of 0(zero). SLASHED: SLASH ZERO
Line Pitch 6/8 LPI Sets line space.
White
Page Skip
On/Off Sets whether to eject a blank sheet. Available only when
simplex is set.
CR Function CR/CR+LF Sets action when CR code is received.
LF Function LF/LF+CR Sets action when LF code is received.
Line Length 80/136 Column Specifies the number of characters per line.
Form Length 11/11.7/12 inch Specifies the length of paper.
TOF Position 0.0/0.1/~1.0
inch
Sets the position from the top edge of paper.
Left Margin 0.0/0.1/~1.0
inch
Sets the amount to shift the horizontal print start position
to the right.
Fit to
Letter
Enable/Disable Sets the printing mode that can fit print data, equivalent
to 11 inches (66 lines), in the LETTER-size printable area.
Text
Height
Same/Diff Sets height of a character.
SAME: Regardless of CPI, same height
DIFF: According to CPI, character heights vary.
ITEM SETTINGS EXPLANATION
To Next Page
Loading...
Need help?
General
