How to fix EEPROM Check registers NG on Oki Printer?
If you encounter an 'EEPROM Check registers NG' error on your Oki Printer, try the following: * Confirm that the NIC is installed correctly, and then turn the printer off and on again. * Initialize the NIC.
Why Oki C9000 does not print?
If your Oki Printer does not print, verify the following: * Make sure the network cable is correctly connected; if it is, try changing it. * Turn the printer off and on again. * Ensure the NIC is connected to the File Server. * Confirm that the printer driver has been mapped to the correct NetWare queue.
How to fix Error writing to Prn1 on Oki C9000?
If you receive an 'Error writing to Prn1' message on your Oki Printer, here are a few things to check: * Make sure the printer is online. * If the error indicates a paper shortage, add more paper and cancel the error. * Check if another user is currently printing; if so, wait until they are finished before printing.
What to do if the certificate was not created on Oki C9000 Printer?
To address a situation where the certificate was not created for your Oki Printer: Log in as an administrator, then click [Security] ? [Cipher (SSL/TLS]. If the “Encryption of Configuration and Print” window appears, the printer’s certificate has not been created. Create a certificate using a web browser or the AdminManager utility.
What to do if the certificate is created, but SSL/TLS is turned off on Oki C9000?
If the certificate is created, but SSL/TLS is turned off on your Oki Printer, change the setting for SSL/TSL to ON. Using the web browser: 1. Open the browser and type in the print server’s IP Address, then press the Enter key. 2. Login. 3. On the [Security] tab, click [Cipher (SSL/TLS)] 4. Change the setting to [SSL/TLS] to ON and click [Submit]. Using AdminManager: 1. Launch the AdminManager utility and login. 2. Click the printer in the list, then click [Setup] ? [OKI Device Setup]. 3. Enter your password, click [OK]. 4. Click the [SSL/TLS] tab. 5. Make sure the box next to [Use Cipher(SSL/TLS)] is checked. 6. Close the utility.
What to do if the browser version is old for Oki C9000?
If you encounter issues related to an old browser version with your Oki Printer, ensure you are using either: * Internet Explorer 5.5 or higher (open the browser, then select [About Internet Explorer] in the [Help] menu) * Netscape Navigator version 6 or higher (open the browser, then select [About Netscape] in the [Help] menu).
Why the operating system does not support IPP printing on Oki Printer?
IPP printing on your Oki Printer is supported only with Windows XP or 2000. Earlier versions of Windows do not support IPP.
What to do if the IP Address for the print server has changed on Oki C9000?
If the IP Address for the print server has changed on your Oki Printer, change the IP Address back to the one in the CSR, then install the CA certificate.
What to do if the print server was initialized after the CSR (Certificate Signing Request) was sent to the CA service on Oki C9000 Printer?
If the print server was initialized after the CSR (Certificate Signing Request) was sent to the CA service for your Oki Printer, you must start the CSR process all over again, recreating and re-sending the CSR to the CA service.
What to do if the CSR has been deleted from the print server while application for a CA certificate is pending?
If the CSR has been deleted from the print server while application for a CA certificate is pending on your Oki Printer, you must start the CSR process all over again, recreating and re-sending the CSR to the CA service.
To Next Page
General
