Oki C9600dn User Manual

16 Configuration: Ad Hoc Mode
Configuration Using AdminManager
1. Launch AdminManager:
• From your computer: [Start] → [Programs] → [OKI
Setup Utility]
→ [Admin Manager]
• From CD, after AutoRun: [(Language]) → [Next] →
[Custom Install] →
[Network
Software]
→ [Installation/Config] → [Admin Mgr /
Quick Setup]
→ [(language)] → [OKI Device Standard
Setup]
→ [Execute from CD-ROM] → [Next].
2. Wait for the software to discover the printer (if automatic
discovery fails, click [File
] → [Search]).
The printer appears as MLETB13 or OkiLAN8200e.
3. Click the discovered printer, then select [Oki Device Setup]
from the Setup menu.
4. Select [Guest User], click [OK].
NOTE
If you are using AdminManager to configure the wireless
card, and you have not installed the utility on your
computer, you will need the CD supplied with your printer to
launch the utility.

Oki C9600dn Specifications

General

Printer Type	Color Laser Printer
Print Resolution	1200 x 1200 dpi
Max Resolution (DPI)	1200 x 1200 dpi
Monthly Duty Cycle	150, 000 pages
Duplex Printing	Yes
Network Connectivity	Ethernet
USB Connectivity	Yes
Connectivity	Ethernet, USB
Supported Media Sizes	A4, A5, B5, Legal, Letter